1. Selection of raw materials

Anti static packaging tubes are generally made of PVC or PS raw materials. The formation of PVC raw materials is simple, convenient for production and processing, and cost-effective. Generally, customers will increasingly choose PVC raw materials. Assuming that the customer has regulations on phthalates regarding this matter, then choosing PS raw materials will comply with halogen-free and Sony regulations.

2. Part standards

It is necessary to provide part drawings for anti-static packaging tubes. Assuming that it is not possible to provide part drawings, it can also be considered to provide 3-5 parts as test samples. Enterprises plan anti-static packaging tubes suitable for automatic production lines and long-distance transportation based on part drawings or specific part samples.

3. The length of anti-static packaging tubes

There are two methods for selecting the length of anti-static packaging tubes: one is for customers to directly inform them of the length of the anti-static packaging tube, and the other is for customers to choose the length of the anti-static packaging tube based on the total number of parts required to be packaged for one anti-static packaging tube according to customer regulations.

4. Selection of plugs

The plug of the anti-static packaging tube can be selected as a rubber plug or a rubber nail. If you choose a rubber plug, you need to use a hole and plug the branch pipe with a compatible steel nail. If you choose a rubber plug, you don't need to open a hole, just choose the appropriate rubber plug according to the size of the branch pipe to seal it tightly.